Zing! Kling Adhesive Tube

(6 reviews) Write a Review

Zing! Kling Adhesive Tube for Fletching

Zing! Kling Adhesive provides the fletcher with confidence that the process of fletching will be trouble-free and that the vanes will stay on. Zing! Kling is think enough to resist running and rubber-toughened to withstand high-speed abuse. It is the toughest fletching adhesive on the market!

How To Use the Zing! Kling Adhesive Tube

Surfaces to be bonded should be clean and dry. Apply only enough to leave a thin film layer after compression. Press parts together and hold firmly for a few seconds. Good contact is essential and an adequate bond develops in less than one minute. For a quicker cure time and stronger bond, use a Zing! Fletching Primer Pen or Pint beforehand.

  • Optimal Set-Time: 30-60 seconds
  • Full cure: 24 hours
  • Full cure with Zing! Primer: 8 hours
  • Product Size: 0.7oz / 20g tube
  • Extra Spout / Cap: Encase mistakes happen, an extra spout / cap is included

Flex-Fletch Performance Promise

Our team at Flex-Fletch is proud of our high-quality products. If you are not satisfied, contact us and we'll make it right.

Made in the U.S.A.

Videos Hide Videos Show Videos