The online store is currently undergoing maintenance. We apologize for the inconvenience. Please contact us to place an order.

To place an order in our other approved store Click here





216.jpg

217.jpg

productBKG.png

Mailing List Sign-Up

Get the latest news and special offers direct to your inbox. Sign-Up


Reo Wilde

Reo Wilde
USA


Stephan Hansen

Stephan Hansen


Duncan Busby

Duncan Busby


Peter Elzinga

Peter Elzinga


Patrizio Hofer

Patrizio Hofer


Christopher Perkins

Christopher Perkins


Shaun Teasdale

Shaun Teasdale


Raymond Ma

Collegiate archer
Collegiate Archer - View web page


Flex-Fletch Products, Inc.

5232 Centerville Road • St. Paul, MN 55127 651.426.4882

© Copyright 2012 Flex-Fletch Products, Inc. All Rights Reserved


  • Dietmar Trillus: Trusts FFP-187 vanes on his Fita and Field arrows and has the medals to prove they are durable and accurate.

  • Reo Wilde: Professional and accurate, Reo relies on Flex-Fletch vanes for consistency and accuracy.  Reo most recently won the Las Vegas World Archery Festival, 2013 using the FFP-470.

  • DON’T -  Use cotton balls or cotton swabs.  They often have oils and chemicals that interfere with adhesion.
  • DON’T -  Use cloth that has been exposed to fabric softeners of any kind.
  • DON’T -  Smoke near solvents.

Follow the easy tips for strong, lasting adhesion every time!

If the glue is stuck to the vane but not the shaft you may want to check with the shaft manufacturer for advise as well.

Click here
for FAQ's - Adhesion Issues tab
Contact us
with any other adhesion questions.


  • Videos:  A collection of informative and entertaining videos about Flex-Fletch, its products, the industry, and competitions
  • Dealer Resources:  Information about our dealer program, applications, and order forms

  • Packaged three to a card
  • Won’t dislodge on shoot-throughs
  • Easy assembly

  • Videos:  A collection of informative and entertaining videos about Flex-Fletch, its products, the industry, and competitions
  • Dealer Resources:  Information about our dealer program, applications, and order forms

Interactive
Catalog

To help save on shipping
we've made our interactive
catalog available here


Dear flexfletch,
I shot a 293/25 with the FFP-187's on x killers. My best score yet, thank you.
micgiles


Features

  • Thin tapered blade
  • Small base .080"
  • Brightest colors
  • Precision made
  • lightweight, 3.08 gn

Benefits

  • Accurate
  • Less time spent fletching arrows
  • Excellent Q.C.
  • Low profile = less wind-drift
  • Outlasts all other vanes






Contact us with questions or comments, or send us your video!


Pro-Nocks brand nocks offer a unique tear-drop design that ensures consistency in release regardless of string size.  Their patented design allows for nock to string contact through the draw, power stroke, and let down.  Available in a variety of colors and sizes, Pro-Nocks were designed to fit tapered end aluminum shafts also.


Ultra Soft Kisser Buttons provide an anchor point that shooters can use to ensure consistency and tight groupings.  These kisser buttons are remarkably soft, yet virtually unbreakable.  They are contoured to fit comfortably in the lips and can be placed above or below the nock.  Ultra Soft Kisser Buttons come in two sizes to fit on nearly any bowstring and are split for easy mounting (close easily with Flex-Fletch adhesives).  Choose from one of seventeen colors; even match them to your Flex-Fletch vanes!

To install Ultra Soft Kisser Buttons:

  • Open the split and place the kisser button in the approximate position.  Draw the bow, letting the kisser button touch the face, and make adjustments accordingly.
  • Mark the spot above and below the button.
  • Place a small amount of Flex-Fletch adhesive glue on the split and squeeze the kisser button closed.
  • Anchor the kisser button using string nocks, or by serving the kisser button in place

    MORE DETAILED INTRUCTIONS

Zing Adhesives




Sticky Note Corner

Most Views (get em in early)

Most Original

Most Convincing/Passionate

Owners' Choice


Instructions


Sticky Note Corner

Most Views (get em in early)

Most Original

Most Convincing/Passionate

Owners' Choice




  • Submit your video link here: http://www.flexfletch.com/pages/Contact/
  • Please include contact information or you may forfeit your prize
  • Entries must be submitted by December 29, 2013
  • Videos must be made available directly to Flex-Fletch as well as posted on youtube.com.
  • By entering the Video Challange you agree to allow Flex-Fletch Products use the video in promotional viewings and on our web page.

  • Submit your video link here: http://www.flexfletch.com/pages/Contact/
  • Please include contact information or you may forfeit your prize
  • Entries must be submitted by December 29, 2013
  • Videos must be made available directly to Flex-Fletch as well as posted on youtube.com.
  • By entering the Video Challange you agree to allow Flex-Fletch Products use the video in promotional viewings and on our web page.

HD: Heavy Duty
Premium: 1 oz
Premium: 1/2 oz
Kling: Thick



Contact us with questions or comments




Contact us with questions or comments, or send us your video!




Contact us with questions or comments, or send us your video!


Zing Primers



4 oz Primer Pump Primer 1/2 oz brush cap NEW Primer Pen .4 oz


Scraggly Lines

Some of my vanes have some squiggly lines on them, will this affect the performance?

Those ‘squiggly’ lines are formed during the curing process and won‘t change the performance of the vane in any way. As you may already know Flex-Fletch vanes are made with a thermal set resin that is unique to the archery vane industry. This process is what makes Flex-Fletch vanes the best in the business. After the material is introduced into the heated molds it begins a curing process. During this process the material may shrink a tiny amount. Some of our dyes are more susceptible to this shrinkage than others and some areas within the molds themselves are also more likely to do this. This shrinkage does not change the mass of the vane and therefore there is no difference in weight between a vane with the lines and one without.

Adhesion Issues:

I love your vanes, they're so durable! Can you give me some advice to help make them stick?

You may read our adhesion tips to see if you find an answer there. There are also detailed instructions below. Flex-Fletch vanes are designed for stability and durability and are well suited for a strong bond to your arrow shaft by following a few simple rules.

There are a few things to look at when having trouble getting vanes to stick. The main thing to remember is: If they‘re not sticking, something is not cleaned properly. So, we will address this question then continue from there.

Analyze where the glue is adhering to when the vane comes off.

* We are only able to address vane adhesion questions here the shaft must be dealt with from the manufacturer. Since there are many manufacturers of arrow shafts, consult the manufacturer of the shaft if the glue is sticking to the vane and not the shaft.

  1. Glue sticking to the shaft means the vane needs the most attention.
  2. Glue sticking to the vane means the shaft needs to be cleaned more thoroughly *. (See shaft manufacturer suggestions.)

If item A above is true, then follow these step-by-step instructions to properly clean & prepare vanes to accept adhesive.

  1. Start with a clean cotton cloth. Here is what I mean by a clean cotton cloth. Washed in the washer with a good quality detergent. NO FABRIC SOFTENER. Fabric softener leaves a residue in the cloth that transfers to the vane base when the solvent is applied. Next you can dry in the dryer but do not use a bounce or similar dryer sheet. This also leaves residue in the cloth. Don‘t use Q-Tips or paper towels. Both of these have in them what they refer to as ‘sizing‘. This is what keeps the cotton on the end of the Q-Tip and also keeps the paper towel stiff and keeps the plys together.
  2. The vane should be in the fletching jig for easier handling.
  3. Wrap cloth around finger. A rubber glove or just the tip of one may be a good idea to protect your skin from contact with the solvent.
  4. Apply a small amount of solvent to the cloth. Just enough so the cloth is saturated but does not drip. Acceptable solvents include: Acetone, Lacquer thinner, Isopropyl Alcohol (at least 97% pure) and denatured alcohol. Don‘t use rubbing alcohol.
  5. Clean each vane before you use it. A freshly cleaned vane has the pores of the plastic open and will accept adhesive more readily.
  6. Wipe vane from one end to the other. Then, rotating your finger slightly and using an unused part of the cloth, wipe in the opposite direction. There should be no reason to rub more than this. There is one school of thought that says to rub the vane until the color begins to come off on the cloth. You may try this if you wish but only if you don‘t get the results you are looking for. The idea is to get the job done and not spend more time than necessary.
  7. Assuming you have the shaft prepared according to the manufacturers suggestions run a thin bead of glue down the length of the vane. Be careful not to use too much glue. More glue does not necessarily mean a better bond. Put the vane to the shaft and you are done. Wait 15 minutes or so before removing the clamp.

To speed up drying time you can try this little trick:

After you’ve put the vane in place, lift it back up and blow on it for about 5 to 10 seconds, then put it back down again. This allows some of the solvent in the glue to begin evaporating and more air molecules to mingle with the adhesive. This will not effect its final grip. With this method you can take the clamp off in about 5 minutes. Or less once you get the hang of it. You’ll find straight fletch is more accepting to this technique but it works well with both.

Price Concerns

To use the old adage “You get what you pay for.” This really is true here. Flex-Fletch Vanes are produced using a process involving thermal set resins. Other vanes use a thermal plastic extrusion process that inherently uses an inferior type of plastic, and allows quick, mass production. As I’m sure you know, quick and fast is never the best way to accomplish anything. Flex-Fletch vanes take much longer to process. The strips are molded, and require time to set and cure. The curing process takes 8 hours in itself.

Value:

Is it worth the cost? Definitely! The benefits of using Flex-Fletch vanes will be evident the first time you shoot.

FLP 300 Stabilization:

Will the FLP 300 vanes be enough to stabilize a 350-grain arrow with an 85-grain broadhead?

The answer to this is complicated. The FLP300 is designed as a 3D competition vane but has been used by many to guide their hunting arrows. If you are fussy about your set-up and tune your bow well I am sure you can get your arrows to fly right with the FLP300′s. With that said the only real way to find out is to try it. Remember everyone is unique, what works for one may not work for another. Final word… I’d say the FLP300 is about as small as one should go for hunting arrows. In the field, the unexpected is unwelcome.

Whisker Biscuit:

How do Flex-Fletch vanes stand up to a whisker biscuit?

I personally have not tested Flex-Fletch vanes through the whisker biscuit but the general consensus is that they are the best for such an application. Flex-Fletch vanes are the most durable vanes on the market. That is not a boast it is a fact. How can I say that Flex-Fletch Vanes are the most durable if I haven’t tested them you ask? Easy. It is a simple matter of plastics. The plastic and process we use at Flex-Fletch is superior to the others. Period.

"Best Vane" Evaluation

Everyone says their vane is the best, what can you tell me to convince me Flex-Fletch vanes really are?

Of course every manufacturer wants you to believe their vane is the best, that’s part of marketing a product and, since anyone can say they are the best, it can get confusing.

As I’ve mentioned in some of the above answers, the matter comes down to superior plastic. Our process is very involved and time consuming. Our plastic is not extruded, this is very important. Ours is a polyurethane that is custom compounded by Flex-Fletch. Our process makes use of thermo set resins in a heat cured environment. After the initial introduction of the material into the molds, the material is allowed to cure for a while before being removed from the molds and placed in an oven for a minimum of 8 hours final cure time. The result is an incredibly tough, memory resilient finished product. Check back here soon for our independent lab test results of all vanes.

Excess Glue:

The short answer to your question is no, the excess glue does not need to be removed for proper flight. But, taking into account the physics of arrow flight it can’t hurt either, as long as care is taken not to compromise the integrity of the bond between shaft and vane. If you don’t want to have anything to blame if you miss a shot you can always remove it.

Vane Length:

The length of the vane most certainly does create differences in how an arrow shoots. Some other factors are Height, Weight, and the position on the shaft. This article about the flight of an arrow will help to explain.

Things to consider: Is the arrow going to be used for hunting? Is it equipped with a broadhead? Field point?

There is far to much to write in this forum, but if you still have questions after reading the article I will be happy to answer any questions you may still have.

Vane Size:

What vane size would would be best for……?

I’m sorry I would need more information to answer your question. Please email us back with: the type of archery (ie; target, indoor, outdoor, hunting, shaft spine etc). There are just too many variables.

Similar Vanes / Different Manufacturers:

Why do some of the top outdoor shooters, and why should I use your FFP187′s when there are other vane manufacturers that make a vane that looks just like it and they’re cheaper?

The answer is quite simple. You summed it up in the last two words of your question. They’re cheaper.

The difference is the plastic. There is no other manufacturer that makes a vane combining all the benefits of a Flex-Fletch vane. See Item #7 above for other benefits.


FastTrack.jpg

What's New

Learn More


Contact us with questions or comments.


Contact us with questions or comments.


Troubleshooting


Sticky Note Corner

Help Make this list complete

This Page is a work in progress and we'd like your help if possible. Being a manufacturer we sell the bulk of our product to distributors, this makes it difficult to know where our products are being sold. Below is a list of shops who order direct from Flex-Fletch, if you know of a shop to add please contact us with contact info. Thanks for your help.


Your Question

Please fill out the form below and then type your question. Whether it's regarding which vane to use, or anything technical regarding one of our products. Be as detailed as possible.

Here are some suggestions:
Type of bow:
Poundage:
Type of shooting: (indoor tourney, 3D, FITA,Field...)
Type of rest: Brand and model if possible
Vanes: Size, Extreme?, color
Shaft: Size, Brand, Model

Add anything you think may be helpful.